Hits
End fed half wave antenna
A single wire,cut at 1\2 wavelength of the desired frequency,fed at one end,therefore without center isolators and coax cable to make it heavy and bulky
post 30 Apr 2024
Antenna End Fed Links →
Multi band end-fed
The antenna is very effective / efficient, it can be mounted as vertical, horizontal or as a sloper, it is low on QRM / QRN, it does not cause any RFI in the cabin, it is very practical to assemble
Realizzazione della EFHWA
E' un semplice L Tuner che adatta l'impedenza dai 50 ohm del RTX ai 2450 dell' End Feed Half Wave Antenna
Remote loading unit for a 160 end fed antenna
I have made three of these remote loading units, two currently in use. . The supply to the motor is via the coax feeder
The end fed wire antenna
A simple matching unit is needed to couple the wire to the rig and a counterpoise is required for some bands
64
The antenna is very effective / efficient, it can be mounted as vertical, horizontal or as a sloper, it is low on QRM / QRN, it does not cause any RFI in the cabin, it is very practical to assemble
E' un semplice L Tuner che adatta l'impedenza dai 50 ohm del RTX ai 2450 dell' End Feed Half Wave Antenna
I have made three of these remote loading units, two currently in use. . The supply to the motor is via the coax feeder
A simple matching unit is needed to couple the wire to the rig and a counterpoise is required for some bands
40m Compact 4-Square Antenna Compact 4-Square Antenna – EA5AVL The EA5AVL 40M Compact 4-Square Antenna was designed to provide excellent DX communications on the 40m band
The K9AY loop antenna for 160 and 80m bands You don't have the space to put up a 4 beverage antenna's, an ewe or a 4-square and want 'good ears' on 160 and 80m? no problems try a k9ay loop antenna
Spiderbeam 10-15-20m E' una Yagi tribanda full-size leggera, fatta di tubi in vetroresina e filo